We can offer 3D laser scanning service for a full size plant. The digital information obtained by the 3D Laser Scanner is transferred to the workstations and the raw data obtained here is interpreted into a valuable data set and a 3-dimensional pre-mathematical model is produced (described as point cloud). This step is the process of post proccessing phase.
From this mathematical modell, we can draw 2D layouts, showing all facility settlements. It is also possible to create the 3D Solid Modell from the same pointcloud. PID Graphics can be extracted from the 3D modell as well as labeling and coding performed under the required standards. 3D Modell is suitable for various of engineering analyzes.
At this point you will no longer waste time and money on re-measurements or mis-calculated invoices when you are providing any additional construction or subcontracting services. It is also possible to translate your 3D Solid Model into '3D Smart Model'. With the intelligent model it is possible to label all of your equipment, fittings, pipelines, electrical panels, cable roads, aircondition channels and all such installations and all primary and secondary level instrumentation in the plant. These models are made in full detail from the pipe diameters to the inside of the tanks, from the flow direction to the limit switches or sensors on it. Following this 'intelligent' model, it is possible to extract the desired PFD (Process Flow Diagrams) and P & ID (Piping and Instrumentation Diagrams / Process Identification Diagrams / Pipe Identification) graphics. As Pulsar Engineering, we can serve you from A to Z in this regard. We are able to present our additional engineering analyzes if required.
PETROCHEMICAL PLANT 3D MODELL
PETROCHEMICAL PLANT LAYOUT DRAWINGS
EXPROOF PUMP STATION WITH COMPLEX PIPING
2nd BIGGEST DAM SIMULATION BY FLOW DYNAMICS
TRUCK LOADING PUMP STATION WITH HORIZANTAL TANK
Phone: +90 212 970 2325
Fax : +90 850 522 3403
Email : firstname.lastname@example.org